Draper SC1 Manual de Instruções descarregar pdf (Página 12)

www.draperinc.com

(765) 987-799

Inteo Light Sensor

Installation Guide

Together with the Chronis Uno L, Chronis IB L, Chronis RTS L, Chronis Comfort RTS, Chronis Comfort IB and

Chronis Comfort UNO, the brightness sensor can be used to operate your roller shutters and venetian blinds in

relation to the amount of light. These control units have an integrated automatic solar control unit (L = light con-

trol) that automatically creates shadow if the sunshine is too strong.

In addition, the Chronis Uno L, Chronis IB L, Chronis Comfort IB and Chronis Comfort UNO offer an automatic

dusk control unit that operates your roller shutters and venetian blinds in conjunction with the switching time when dusk sets in.

Insert the plug of the brightness transmitter into the

socket on the front of the Chronis L (or Chronis Comfort)

control unit.

Stick the suction cap of the brightness sensor to

the inside of the window pane at the desired shade

position of the roller shutter.

1 Installation

2 Programming

2.1 Automatic solar control unit with a Chronis L

Switching the automatic solar control unit on / off.

The automatic solar control is activated when the UP switching time is reached and de-activated when the DOWN switching time

is reached. This means the following in normal use: the automatic solar control unit is switched on during the day and off at night.

When it is on, a is shown in the display. You can switch the automatic solar control unit on or off manually during the day.

To switch the automatic solar control unit off:

➀ Press once the time ﬂ ashes.

➁ Press until the bar display for the “Sun” reference value is displayed.

➂ Press

several times until is displayed.

➃ Press to store the changes.

To switch the automatic solar control unit back on:

➀ Press once the time ﬂ ashes.

➁ Press until is displayed.

➂ Press

several times until the desired number of bars for the “Sun” reference value has been set.

➃ Press to store the changes.

Setting the automatic solar control unit

The desired brightness value at which the shutter is to move into the shade position can be selected by entering the “Sun” reference value. The

factory setting for the automatic solar control unit is a threshold value of 6 bars (30 kLux approximately). Inputting the “Sun” reference value (can

be entered at any time except in the “OFF” position) :

➀ Press once the time ﬂ ashes.

➁ Press until the bar display for the “Sun” reference value is displayed.

➂ The “Sun” reference value can be set by pressing

several times. 1 bar = roller shutter moves into the shade position if sun is weak

(10 kLux). 12 bars = roller shutter moves into the shade position if sun is strong (more than 50 kLux).

➃ Press to store the changes.

Tip: it is best to enter data when the sun reaches the intensity at which you wish to move the shutter automatically into the shade position in the

future. First set the “Sun” reference value to 12 bars, and then press Minus (-) until the sun symbol ( ) is ﬂ ashing. This value then corresponds

to the current solar intensity.

Page 12 of 120

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 119 120

Comentários a estes Manuais

Sem comentários

Draper SC1 Manual de Instruções Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com não Draper SC1